Topos energy storage CCS, flexible customization: injection molding or blister insulation board can be selected for Bracket; wire harness, FPC, or PCB can be selected for the collection component; epoxy head, OT terminal, nickel terminal (all contain NTC) can be selected for the temperature sensing collection line; the 1060 aluminum plate with an aluminum content of 99.6%. The connection method can be glued, screwed, ultrasonic welding or laser welding.

At present, there are two failure modes of temperature sensors reported by the market: poor waterproof and pressure resistance. One is for the impact of moisture, Topos sensor can withstand boiling water for 168 hours under the condition of maintaining a temperature resistance of 175 degrees. Break the industry's 48-hour limit; Second, on the issue of insulation, Topos sensor can withstand a voltage of 5000VDC for a long time, which is much higher than the industry's standard requirement of 3500VDC.

The Topos communication energy storage CCS applied to the 5G base station, through the copper and aluminum bar, realizes the series and parallel connection of the battery cells, outputs the current; collects the voltage of the battery cell; collects the temperature of the battery cell. There are screw fixing, laser welding, ultrasonic welding, and other solutions

With 10 years of experience in the development of NTC chips, NTC thermistors, temperature sensors, and wiring harness bottom layers, Topos provides lithium battery bodies, battery cooling media, and temperature sensors for BMS control boards for portable energy storage.